JN0-363 Exam PDF [2023] Tests Free Updated Today with Correct 265 Questions
Juniper JN0-363 Exam Preparation Guide and PDF Download
The JN0-363 exam is an essential certification for professionals who want to pursue a career in service provider routing and switching. The certification is recognized globally, and it demonstrates the candidate's expertise in service provider networking technologies. The certification also provides a competitive advantage in the job market, as it is highly valued by employers. Candidates who pass the JN0-363 exam receive the JNCIS-SP certification, which is a stepping stone to higher-level certifications, such as JNCIP-SP and JNCIE-SP.
The JN0-363 exam is a comprehensive exam that covers a wide range of topics, including routing policies, OSPF, BGP, MPLS, Layer 2 VPNs, Layer 3 VPNs, multicast, and many more. The exam is designed to test the candidate's understanding of the concepts and technologies used in service provider networks. The exam is conducted in a proctored environment and consists of multiple-choice questions, scenario-based questions, and simulations.
NEW QUESTION # 29
In your network, you have two LDP routers connected across four physical interfaces. You have also enabled LDP to operate on all four of those interfaces. What is the resulting outcome of your configuration between those two routers?
- A. One session is built across one neighbor relationship
- B. Four sessions are built across one neighbor relationship
- C. Four sessions are built across four neighbor relationships
- D. One session is built across four neighbor relationships
Answer: D
NEW QUESTION # 30
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Prefixes in Level 2 will be redistributed to Level 1.
- B. Prefixes in Level 1 will be redistributed to Level 2.
- C. Prefixes In Level 2 will be not redistributed to Level 1.
- D. Prefixes in Level 1 will not be redistributed to Level 2.
Answer: A
NEW QUESTION # 31
Exhibit
Referring to the exhibit, how do you verify the status of the tunnel from R1?
- A. Issue the ping 172.20.111.10 source 198.51.100.1 command.
- B. Issue the ping 172.20.111.10 source 172.20.110.1 command.
- C. Issue the ping 172.20. Ill. 10 command.
- D. Issue the ping 172.20.iii.io source 203.0.113.2 command.
Answer: D
NEW QUESTION # 32
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. The router will analyze the traffic engineering database to determine the best path through the network
- B. The router will attempt to signal the LSP along the IGP shortest path to 192.168.100.1
- C. The router will prune links with insufficient bandwidth from the path before beginning the signaling process
- D. The router will precalculate a valid path through the network for LSP r1-to-r3
Answer: C
NEW QUESTION # 33
Click the Exhibit button.
You are troubleshooting a new BGP peering session which is not establishing.
Referring to the exhibit, which statement is true?
- A. The peer's AS number is misconfigured
- B. The TCP session is not establishing
- C. The neighbor does not support IPv6
- D. The update messages contain an unsupported option
Answer: A
NEW QUESTION # 34
Exhibit
You configured interface ge-0/070.0 to run IS-IS. but this interface does not appear in the output of the show isis adjacency command as shown in the exhibit.
What is the problem in this scenario?
- A. The router at the other end of the link is a Level 1 only router.
- B. This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g statement.
- C. The router at the other end of the link Is not sending any IS-IS Hello messages.
- D. The family iso statement must be added to the logical interface.
Answer: D
NEW QUESTION # 35
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The BGP peerings between R1, R2, and R3 should use loopback interface addresses
- B. The BGP peering between R1 and R4 should use loopback interface addresses
- C. The BGP peerings between R1, R2, and R3 should use physical interface addresses
- D. The BGP peering between R1 and R4 should use physical interface addresses
Answer: A,D
NEW QUESTION # 36
Which statement is true when using MVRP on MX Series devices?
- A. MVRP works with RSTP and VSTP, but not MSTP
- B. MVRP works with MSTP and RSTP, but not VSTP
- C. MVRP works with MSTP and VSTP, but not RSTP
- D. MVRP does not work with MSTP, RSTP, and VSTP
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/mvrp.html
NEW QUESTION # 37
Which two problems occur when increasing numbers of users are added to an Ethernet LAN with no switches present? (Choose two.)
- A. Some devices will not see certain traffic
- B. There is a greater chance for collisions to occur
- C. The MAC table sizes increase
- D. There is unnecessary consumption of network bandwidth
Answer: B,D
NEW QUESTION # 38
Click the Exhibit button. What does IS-IS/18 mean in the output displayed in the exhibit?
- A. These routes are external Level 2 routes.
- B. These routes are internal Level 2 routes.
- C. These routes are internal Level 1 routes.
- D. These routes are external Level 1 routes.
Answer: B
NEW QUESTION # 39
Click the Exhibit button. After the MAC learning limit of 3000 is reached for the bd bridge domain as shown in the exhibit, what happens to frames that arrive that contain unknown unicast destination addresses?
- A. The are forwarded to the default gateway.
- B. They are dropped.
- C. They are forwarded to the IRB interface.
- D. They are flooded.
Answer: D
NEW QUESTION # 40
Which new field is added to an IPv6 header as compared lo IPv4?
- A. fragment offset
- B. flow label
- C. checksum
- D. version
Answer: B
NEW QUESTION # 41
You have recently configured MSTP on two switches in your network to participate in the same MSTP region. You issue the show spanning-tree mstp configuration command on both switches and notice that the configuration digests do not match.
What does this mismatch indicate?
- A. You should ensure that the MSTIs and their VLAN IDs are equal on both switches.
- B. Everything is functioning as expected because the configuration digests should not match.
- C. You should ensure that the bridge IDs and priority values are unique on both switches.
- D. You should ensure that the max-age and hello timers are equal on both switches.
Answer: A
NEW QUESTION # 42
You must establish an MPLS LSP between two locations. You are required to ensure that the LSP traverses specific routers within the network.
Which solution is correct in this scenario?
- A. Enable traffic engineering within LDP and define the explicit route the LSP must follow
- B. Enable traffic engineering within RSVP and enable the Fast Reroute feature
- C. Implement RSVP and define the explicit route the LSP must follow
- D. Implement LDP and define the explicit route the LSP must follow
Answer: C
NEW QUESTION # 43
In an IS-IS network, which device represents the pseudo-node?
- A. a router connected to the backbone
- B. a router with an IS-IS export policy
- C. a designated intermediate system
- D. an area border router
Answer: C
NEW QUESTION # 44
Click the Exhibit.
Referring to the exhibit, which IS-IS router will be selected as the DIS?
- A. Router 4
- B. Router 1
- C. Router 2
- D. Router 3
Answer: A
NEW QUESTION # 45
You are asked to configure and apply a new routing policy to influence routing advertisements received from a specific EBGP peer.
In this scenario, which statement is true?
- A. The new policy should be applied as an import policy for the specific EBGP peer.
- B. The new policy should be applied as an export policy for the specific EBGP peer.
- C. The new policy should be applied as an import policy for the EBGP group in which the peer is defined.
- D. The new policy should be applied as an export for the EBGP group in which the peer is defined.
Answer: A
NEW QUESTION # 46
How does a Junos device learn about MAC addresses when II is first connected to an Ethernet LAN?
- A. The device learns the source MAC addresses from traffic in the network and stores this MAC address in addition to the interface from which the traffic was received.
- B. The device sends out a network broadcast message asking tor all devices and MAC addresses on the network and stores this information In addition lo the interface from which the response was received.
- C. The device learns the destination MAC addresses from traffic in the network and stores this MAC address in addition to the interface from which the traffic was received.
- D. The device sends out a network multicast message asking for all devices and MAC addresses on the network and stores this Information in addition to the interface from which the response was received.
Answer: D
NEW QUESTION # 47
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.2.2.2 are less preferred than the default local preference
- B. Routes from 10.1.1.1 are more preferred than routes from 10.2.2.2
- C. Routes from 10.3.3.3 are more preferred than the default local preference
- D. Routes from 10.2.2.2 are less preferred than routes from 10.3.3.3
Answer: C
NEW QUESTION # 48
Which two statements describe advantages of using BGP for VPLS signaling instead of LDP signaling? (Choose two.)
- A. There is no need for MPLS signaling protocol.
- B. There is a well-defined scaling hierarchy.
- C. There is a separation of signaling from other services.
- D. There is auto discovery.
Answer: B,D
NEW QUESTION # 49
......
To take the Juniper JN0-363 exam, candidates must have a solid understanding of networking concepts and protocols, as well as experience configuring and troubleshooting Juniper Networks routers and switches. Candidates should also have a good understanding of service provider networking and the challenges associated with managing large-scale networks. The JN0-363 exam is designed to validate the skills and knowledge required to work in a service provider environment and is a valuable certification for network professionals who want to advance their career.
Verified & Correct JN0-363 Practice Test Reliable Source May 25, 2023 Updated: https://www.pass4surecert.com/Juniper/JN0-363-practice-exam-dumps.html
Free Juniper JN0-363 Exam Files Downloaded Instantly: https://drive.google.com/open?id=1toYDrbjsL_aMoyH0sToRzxgmd2GI8pv9