2022 Latest 156-585 Exam Dumps Recently Updated 116 Questions
CheckPoint 156-585 Real 2022 Braindumps Mock Exam Dumps
CheckPoint 156-585 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 59
Which Daemon should be debugged for HTTPS Inspection related issues?
- A. VPND
- B. HTTPD
- C. FWD
- D. WSTLSO
Answer: D
NEW QUESTION 60
What is the correct syntax to set all debug flags for Unified Policy related issues?
- A. fw ctl debug -m UP all
- B. fw ctl debug -m fw all
- C. fw ctl kdebug -m UP all
- D. fw ctl debug -m up all
Answer: A
NEW QUESTION 61
What does CMI stand for in relation to the Access Control Policy?
- A. Content Matching Infrastructure
- B. Content Management Interface
- C. Context Manipulation Interface
- D. Context Management Infrastructure
Answer: D
NEW QUESTION 62
You need to runa kernel debug over a longer period of time as the problem occurs only once or twice a week.
Therefore you need to add a timestamp to the kernel debug and write the output to a file What is the correct syntax for this?
- A. fw ctl debug -T -f > filename debug
- B. fw ctl kdebug -T -f -o filename debug
- C. fw ctl kdebug -T > filename debug
- D. fw ctl kdebug -T -f > filename debug
Answer: A
NEW QUESTION 63
If you run the command "fw monitor -e accept src=10.1.1.201 or src=172.21.101.10 or src=192.0.2.10;" from the cli sh What will be captured?
- A. Packets from 10 1 1 201 going to 192.0 2.10
- B. Packets destined to 172 21 101 10 from 10.1.1.101
- C. fw monitor only works in expert mode so no packets will be captured
- D. Only packet going to 192.0.2.10
Answer: D
NEW QUESTION 64
The Check Point Firewall Kernel is the core component of the Gala operating system and an integral part of traffic inspection process. There are two procedures available for debugging the firewall kernel. Which procedure/command is used for detailed troubleshooting and needs more resources?
- A. fw debug/kdebug ctl
- B. fw debug/kdebug
- C. fw ctl debug/kdebug
- D. fw ctl zdebug
Answer: D
NEW QUESTION 65
What is connect about the Resource Advisor (RAD) service on the Security Gateways?
- A. RAD is completely loaded as a kernel module that looks up URL in cache and if not found connects online for categorization There isno user space involvement in this process
- B. RAD functions completely in user space The Pattern Matter (PM) module ofthe CMI looks up for URLs in the cache and if not found, contact the RAD process inuser space to do online categorization
- C. RAD has a kernel module that looks up the kernel cache, notifies client about hits and misses andforwards a-sync requests to RADuser space module which is responsible for online categorization
- D. RAD is not a separate module, it is an integrated function of the 'fw1 kernel module and does all operations in the kernel space
Answer: B
NEW QUESTION 66
When a User process or program suddenly crashes, a core dump is often used to examine the problem. Which command is used to enable the core-dumping via GAIA dish?
- A. set core-dump total
- B. set user-dump enable
- C. set core-dump per_process
- D. set core-dump enable
Answer: A
NEW QUESTION 67
How many captures does the command "fw monitor -p all" take?
- A. The -p option takes the same number of captures, but gathers all of the data packet
- B. 1 from every inbound and outbound module of the chain
- C. All 4 points of the fw VM modules
- D. All 15 of the inbound and outbound modules
Answer: D
NEW QUESTION 68
The customer is using Check Point appliances that were configured long ago by third-party administrators. Current policy includes different enabled IPS protections and Bypass Under Load function. Bypass Under Load is configured to disable IPS inspections of CPU and Memory usage is higher than 80%. The Customer reports that IPS protections are not working at all regardless of CPU and Memory usage.
What is the possible reason of such behavior?
- A. The kernel parameter ids_tolerance_stress is set to 10
- B. The kernel parameter ids_tolerance_no_stress is set to 10
- C. The kernel parameter ids_assume_stress is set to 0
- D. The kernel parameter ids_assume_stress is set to 1
Answer: A
NEW QUESTION 69
Which command can be run in Expert mode to verify the core dump settings?
- A. grep cdm /config/db/initial
- B. cat /etc/sysconfig/coredump/cdm.conf
- C. grep $FWDIR/config/db/initial
- D. grep cdm /config/db/coredump
Answer: C
NEW QUESTION 70
What file contains the RAD proxy settings?
- A. rad_settings.C
- B. rad_services.C
- C. rad_control.C
- D. rad_scheme.C
Answer: A
NEW QUESTION 71
Troubleshooting issues with Mobile Access requires the following:
- A. Standard VPN debugs and packet captures on Security Gateway, debugs of "cvpnd' process on Security Management
- B. Debug logs of FWD captured with the command - 'fw debug fwd on TDERROR_MOBILE_ACCESS=5'
- C. 'ma_vpnd' process on Secunty Gateway
- D. Standard VPN debugs, packet captures, and debugs of cvpnd' process on Security Gateway
Answer: D
NEW QUESTION 72
Your fwm constantly crashes and is restarted by the watchdog. You can't find any coredumps related to this process, so you need to check If coredumps are enabled at all How can you achieve that?
- A. in expert mode run show core-dump status
- B. in dish run show core-dump status
- C. in dish run show coredumb status
- D. in dish run set core-dump status
Answer: C
NEW QUESTION 73
How can you start debug of the Unified Policy with all possible flags turned on?
- A. fw ctl debug -m UP *
- B. fw ctl debug -m fw + UP
- C. fw ctl debug -m UP all
- D. fw ctl debug -m UnifiedPolicy all
Answer: A
NEW QUESTION 74
Rules within the Threat Prevention policy use the Malware database and network objects. Which directory is used for the Malware database?
- A. $FWDlR/log/install_manager_tmp/ANTIMALWARBlog?
- B. $FWDlR/conf/install_firewall_imp/ANTIMALWARE/conf/
- C. $FWDIR/conf/install_manager_tmp/ANTIMALWARE/conf/
- D. $CPDIR/conf/install_manager_lmp/ANTIMALWARE/conf/
Answer: A
NEW QUESTION 75
How can you increase the ring buffer size to 1024 descriptors?
- A. fw ctl int rx_ringsize 1024
- B. dbedit>modify properties firewall_properties rx_ringsize 1024
- C. echo rx_ringsize=1024>>/etc/sysconfig/sysctl.conf
- D. set interface eth0 rx-ringsize 1024
Answer: D
NEW QUESTION 76
Which command do you need to execute to insert fw monitor after TCP streaming (out) in the outbound chain using absolute position? Given the chain was 1ffffe0, choose the correct answer.
- A. fw monitor -po -0x1ffffe0
- B. fw monitor -p0 ox1ffffe0
- C. fw monitor -po 1ffffe0
- D. fw monitor -p0 -ox1ffffe0
Answer: A
Explanation:
Explanation
https://sc1.checkpoint.com/documents/R80.40/WebAdminGuides/EN/CP_R80.40_PerformanceTuning_AdminG
NEW QUESTION 77
Which file is commonly associated with troubleshooting crashes on a system such as the Security Gateway?
- A. tcpdump
- B. fw monitor
- C. CPMIL dump
- D. core dump
Answer: D
NEW QUESTION 78
Which Threat Prevention Daemon is the core Threat Emulation engine and responsible for emulation files and communications with Threat Cloud?
- A. scrub
- B. ted
- C. ctasd
- D. in.msd
Answer: B
NEW QUESTION 79
......
Verified 156-585 Exam Dumps Q&As - Provide 156-585 with Correct Answers: https://www.pass4surecert.com/CheckPoint/156-585-practice-exam-dumps.html
156-585 Exam Questions | Real 156-585 Practice Dumps: https://drive.google.com/open?id=1d1W_VcQxz7T83soNljWeHtyKD1LGxLfT