Validate your NS0-528 Exam Preparation with NS0-528 Practice Test (Online & Offline)
Get all the Information About Network Appliance NS0-528 Exam 2024 Practice Test Questions
NEW QUESTION # 51
You are asked to verify that data stored in your disaster recovery site can be restored and is viable. Currently, you have a NetApp SnapMirror relationship with a MirrorAllSnaps policy type that is enabled and is updating frequently.
What would be a nondisruptive method to carry out a detailed validation of your disaster-recovery strategy?
- A. Break the SnapMirrorrelationship and validate the data.
- B. Use SyncMirror on the destination aggregate on the destination cluster, and validate the data.
- C. Create a FlexClone volume of the destination volume on the destination cluster, and validate the data.
- D. Perform a SnapMirror reverse resynchronization to restore the data from the destination cluster to the source cluster, and validate the data.
Answer: D
NEW QUESTION # 52
When creating a new workflow in OnCommand Workflow Automation, what is the correct order to apply commands in your new workflow?
- A. alphabetically A-to-Z
- B. numerically 1-to-999
- C. left to right, top to bottom
- D. largest to smallest
Answer: C
NEW QUESTION # 53
What is NetApp data protection software?
- A. A software solution for managing data analytics
- B. A software solution for managing virtual machines
- C. A software solution for managing data backups
- D. A software solution for managing cloud storage
Answer: C
NEW QUESTION # 54
After deploying two new AFF A250 clusters that will be SnapMirror destinations for each other, the customer wants replication traffic to be encrypted in flight.
In this scenario, which statement is correct?
- A. Enable SnapMirror encryption on each storage W peer relationship.
- B. SnapMirror encryption is enabled by default on each cluster peer relationship.
- C. SnapMirror encryption is enabled by default on each storage MO peer relationship.
- D. Set a complex passphrase on the cluster peer relationship.
Answer: B
NEW QUESTION # 55
You are the administrator of your company's ONTAP clusters. You are asked to provide a disaster recovery solution between your primary AFF A400 cluster and your FAS2720 cluster with the highest possible availability at the lowest possible price.
In this scenario, which product will satisfy this requirement?
- A. MetroCluster
- B. SVM-DR
- C. SM-S
- D. SnapMirror
Answer: A
NEW QUESTION # 56
You are the administrator of an ONTAP 9.7 cluster. You configured an hourly Snapshot schedule for all volumes. One of your users accidentally deleted an important spreadsheet file on an SMB share. This file must be restored within a minimum amount of time.
Which two actions satisfy this requirement? (Choose two.)
- A. In ONTAP System Manager, navigate to the volume where the share resides, click on "Snapshot Copies" and restore the latest Snapshot copy.
- B. On the cluster CLI, issue the volume clone restore command.
- C. On the cluster CLI, issue the volume snapshot restore-file command.
- D. In Windows Explorer, right-click on the SMB share where the file was deleted, go to "Previous Versions" and select the file, then copy it to the original location.
Answer: C,D
NEW QUESTION # 57
You want to ensure that a particular version of SnapManager for SQL is supported in a configuration.
Which three components need to be verified in the Interoperability Matrix? (Choose three.)
- A. Data ONTAP version
- B. SnapManager version
- C. SnapDrive version
- D. FC HBA firmware
- E. On Command Unified Manager version
Answer: A,B,C
NEW QUESTION # 58
What is MetroCluster in NetApp ONTAP?
- A. A method for compressing data to reduce storage space
- B. A cloud storage solution that provides backup and recovery services
- C. A method for encrypting data to protect it from unauthorized access
- D. A high-availability solution that provides synchronous data replication between two clusters
Answer: D
NEW QUESTION # 59
You must manually upgrade your company's 8-node cluster from ONTAP 9.5 to ONTAP 9.7. Due to the sensitivity of the data that is being stored on the cluster, it is company policy to perform these upgrades one node at a time.
What are two steps that you must perform to accomplish this task? (Choose two.)
- A. Terminate active SMB connections.
- B. Terminate active NFS connections.
- C. Change disk ownership.
- D. Move Epsilon to maintain cluster quorum.
Answer: A,D
NEW QUESTION # 60
Your customer wants to ensure that the SnapMirror relationships are easily managed in a bidirectional, multi-cluster environment.
Which version of clustered Data ONTAP would you recommend?
- A. clustered Data ONTAP 9.1
- B. clustered Data ONTAP 8.2.3
- C. clustered Data ONTAP 8.3
- D. clustered Data ONTAP 8.1.4
Answer: A
NEW QUESTION # 61
An ONTAP administrator is trying to configure a three-way-disaster recovery solution. Cluster 2 is within 50 km of Cluster 1, the primary cluster, with an RTT of 7 ms. Cluster 3 is over 300 km from Cluster 1 with an RTT of 29 ms.
In this scenario, what are two topologies that would accomplish this task? (Choose two.)
- A. a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror Synchronous from Cluster 2 to Cluster 3
- B. a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror Synchronous to Cluster 3
- C. a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror asynchronous from Cluster 2 to Cluster 3
- D. a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror asynchronous from Cluster 1 to Cluster 3
Answer: C,D
NEW QUESTION # 62
Exhibit:
Referring to the exhibit, which volume has the highest level of protection assigned to it?
- A. mworthen_src1_lun
- B. my_vol
- C. new_work_vol
- D. project_a
Answer: A
NEW QUESTION # 63
You have deployed IntelliSnap to list NetApp Snapshot copies in volumes on your ONTAP system, schedule new backups on unprotected volumes, and implement archiving to your remote AltaVault system.
Which additional NetApp product does IntelliSnap require to perform all of these actions?
- A. OnCommand Performance Manager
- B. OnCommand Unified Manager
- C. OnCommand System Manager
- D. OnCommand Insight
Answer: B
NEW QUESTION # 64
A customer wants to maintain a single copy for both disaster recovery and backup on a secondary system.
Which SnapMirror policy andrelationship type should be used?
- A. Mirror And Vault/Relationship Type LS
- B. Mirror And Vault/Relationship Type DP
- C. Mirror And Vault/Relationship Type XDP
- D. Mirror And Vault/Relationship Type TDP
Answer: C
NEW QUESTION # 65
A customer must protect an ONTAP Select cluster at remote locations. They have a very limited network connection between sites for 30 remote locations and the data center. They want to be able to recover a remote site with an RPO of 60 minutes.
In this scenario, which solution accomplishes this task?
- A. FlexClone
- B. SnapMirror Synchronous
- C. SnapVault
- D. MetroCluster
Answer: C
NEW QUESTION # 66
Using SnapCenter 4.0, you are restoring a virtual machine.
Which additional tool would be used to monitor the restore?
- A. VMware vSphere Web client
- B. Virtual Storage Console
- C. OnCommand System Manager
- D. OnCommand Unified Manager
Answer: A
NEW QUESTION # 67
What is a Snapshot in NetApp ONTAP?
- A. A backup method that captures the entire state of a system at a specific point in time
- B. A method for compressing data to reduce storage space
- C. A method for encrypting data to protect it from unauthorized access
- D. A file-level backup method that only backs up changed files
Answer: A
NEW QUESTION # 68
......
Check Real Network Appliance NS0-528 Exam Question for Free (2024): https://www.pass4surecert.com/NetworkAppliance/NS0-528-practice-exam-dumps.html
Get Ready to Boost your Prepare for your NS0-528 Exam with 215 Questions: https://drive.google.com/open?id=1u5e0Nb5ipfnl4eul1rKGRZKaEWyWu6U5