
Excellent MTCNA PDF Dumps With 100% Pass4sureCert Exam Passing Guaranted [Jan-2022]
100% Pass Your MTCNA MikroTik Certified Network Associate Exam at First Attempt with Pass4sureCert
Who should take the MikroTik Certified Network Associate (MTCNA) Exam
The MTCNA exam tests are for those who would like to talk about RouterOS. A good starting point for someone who wants to take their first steps in the routing environment, anyone who wants to be certified as a MikroTik Certified Network Associate, anyone who wants to join the MikroTik group. This test is targeted at everyone interested in learning basic MikroTik, Engineers of the Network, Infrastructure for IT Networks, A freelancer, and anyone who wishes to create a network carrier.
This is for Network engineers and technicians wanting to deploy and support:
- Corporate networks
- Client CPEs (WISPs and ISPs)
NEW QUESTION 94
If 'check-gateway' is enabled for an ECMP route and one of the gateways is unreachable, then:
- A. ECMP is going to send packets to all gateways even if one is unreachable.
- B. The ECMP route becomes inactive.
- C. The unreachable gateway is not going be used in Round Robin algorithm.
Answer: C
NEW QUESTION 95
What does the firewall action "Redirect" do? Select all true statements.
- A. Redirects a packet to a specified port on a host in the network
- B. Redirects a packet to a specified IP
- C. Redirects a packet to the router
- D. Redirects a packet to a specified port on the router
Answer: A,B
NEW QUESTION 96
When backing up your router by using the 'Export' command, the following happens:
- A. Winbox usernames and passwords are backed up
- B. The Export file can be edited with a standard text editor after its creation
- C. You are requested to give the export file a name
Answer: B,C
NEW QUESTION 97
What command is used to create a backup configuration?
- A. wr mem
- B. config mem
- C. copy running-config startup-config
- D. copy running backup
Answer: C
NEW QUESTION 98
RouterOS log messages are stored on disk by default
- A. True
- B. False
Answer: B
NEW QUESTION 99
MikroTik RouterOS is sending logs to an external syslog server. Which protocol and port is used by RouterOS for sending logs (by default)?
- A. TCP 110
- B. UDP 514
- C. UDP 113
- D. UDP 21
Answer: B
NEW QUESTION 100
What does a VLAN do?
- A. Provides multiple collision domains on one switch port.
- B. Breaks up broadcast domains in a layer 2 switch internetwork.
- C. Provides multiple broadcast domains within a single collision domain.
- D. Acts as the fastest port to all servers.
Answer: B
NEW QUESTION 101
Which is a default baud-rate of currently manufactured RouterBOARDs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 102
What is term for the hardware coded address found on an interface?
- A. MAC Address
- B. Interface Address
- C. IP Address
- D. FQDN Address
Answer: A
NEW QUESTION 103
What wireless card can we use to achieve 100 Mbps actual wireless throughput?
- A. 802.11 a/b/g/n
- B. 802.11 b/g
- C. 802.11 a/n
- D. 802.11 a/b/g
- E. 802.11 a
Answer: B
NEW QUESTION 104
If you use either Telnet or FTP, which is the highest layer you are using to transmit data?
- A. Presentation
- B. Session
- C. Application
- D. Transport
Answer: C
NEW QUESTION 105
Action=redirect applies to
- A. Firewall Filter rules
- B. SRC-NAT rules
- C. DST-NAT rules
- D. Route rules
Answer: C
NEW QUESTION 106
There are two wireless cards (wlan1 and wlan2) which are bridged together. On wlan1 card there is a setting
"Forwarding=no". Choose the correct answer(s):
- A. To prevent communication between wlan1 and wlan2 one cannot use Bridge Filters
- B. Stations on wlan1 will be able to communicate with stations on wlan2
- C. Stations on wlan2 will be able to communicate with stations on wlan1
- D. Stations on wlan2 will be able to communicate with stations on wlan2
- E. Stations on wlan1 will be able to communicate with stations on wlan1
Answer: A
NEW QUESTION 107
For user in local PPP Secrets/PPP Profiles database, it is possible to
- A. Deny services (like telnet) only for this user or for one group of users
- B. Allow/deny use of more than one login by this user
- C. Allow only PPPoE login
- D. Set max values for transferred data (Rx/Tx)
- E. Allow login by PPPoE and PPTP, but deny login by L2TP
Answer: B,C,D
NEW QUESTION 108
You can not use OSPF and RIP routing protocols simultaneously on the RouterOS.
- A. FALSE
- B. TRUE
Answer: A
NEW QUESTION 109
Action=redirect allows you to make
- A. Transparent HTTP Proxy
- B. Enable Local Service
- C. Transparent DNS Cache
- D. Forward DNS to another device IP address
Answer: A,C
NEW QUESTION 110
......
How to book the MikroTik Certified Network Associate (MTCNA) Exam
You have to follow these steps to participate in the MikroTik Certified Network Associate (MTCNA) exam:
- Step 1: Hover on to the training portal of MikroTik
- Step 2: Prepare and take the MTCNA exam test
- Step 3: Select your exam i.e. MTCNA
- Step 4: Click the link available
- Step 5: Create a new account and log in
- Step 6: Follow the instructions to schedule your exam
Trend for MTCNA pdf dumps before actual exam: https://www.pass4surecert.com/MikroTik/MTCNA-practice-exam-dumps.html
Real Exam Questions & Answers - MikroTik MTCNA Dump is Ready: https://drive.google.com/open?id=1HHkZ_5rs76juiZNJUvdCh1BuS6rNq22b