Pass Your 300-820 Exam Easily With 100% Exam Passing Guarantee [2021]
300-820 Dumps are Available for Instant Access from Pass4sureCert
How could you focus for Implementing Cisco Collaboration Cloud and Edge Solutions Exam
Right here is the exam overview for Cisco 300-820 Exam
Cisco 300-820 Exam: Get our snappy guide in the event that you don’t have the opportunity to peruse all the page
The CCNP Collaboration certification is designed to Exam a network specialist’s ability to apply and also to preserve innovations from the core partner network. The CCNP Collaboration core exam validates the candidate’s understanding of the Cisco specific framework, phone call control, QoS, and collaboration sections, including:Network component repair as part of a partnership solution,Identify and use the appropriate cooperative codecs, Using Cisco Unified CM to produce SIP translations, courses, and routing templates. ISDN PRI / BRI Configuration and Repair,Identify problems that generate inappropriate voice and high-quality video.
In this guide, we will cover the Implementing Cisco Collaboration Cloud and Edge Solutions (300-820) Exam , Implementing Cisco Collaboration Cloud and Edge Solutions (300-820) Certification salary and all aspects of the Implementing Cisco Collaboration Cloud and Edge Solutions (300-820) Certification.
Here is the benefit in Obtaining the Cisco 300-820 Exam
- Implementing Cisco Collaboration Cloud and Edge Solutions (300-820) Certification provides practical experience to candidates from all the aspects to be a proficient worker in the organization.
- Implementing Cisco Collaboration Cloud and Edge Solutions (300-820) enhances professional credibility of aspirants and hence ameliorate career opportunities-promotion, increase in pay, job portability.
- Get hands-on experience with Cisco Expressway software for secure remote access to phones, terminals, smartphones, tablets, videos, and other communication devices to support non-traditional workspaces.
- Implementing Cisco Collaboration Cloud and Edge Solutions (300-820) will be confident and stand different from others as their skills are more trained than non-certified professionals.
- Implementing Cisco Collaboration Cloud and Edge Solutions (300-820) has the skills and knowledge to use the tools to complete the task efficiently and cost effectively than the other non-certified professionals lack in doing so.
- Gain the knowledge and skills to use tools and systems designed to facilitate team collaboration, both in the office and remotely.
- Implementing Cisco Collaboration Applications have a cutting edge among competitors and peers. As Implementing Cisco Collaboration Cloud and Edge Solutions (300-820) certification serves as portable proof of skill and ability.
NEW QUESTION 50
Refer to the exhibit.
Which two outbound connections should an administrator configure on the internal firewall? (Choose two.)
- A. Media: UDP 36012 to 59999
- B. XMPP: TCP 7400
- C. SIP: TCP 7001
- D. SIP TCP 5061
- E. HTTPS: TCP 8443
Answer: B,C
NEW QUESTION 51
What is a key configuration requirement for Hybrid Message Service High Availability deployment with multiple IM and Presence clusters?
- A. You must have the Intercluster Lookup Service working across all of your IM and Presence clusters.
- B. You must have the Intercluster Sync Agent working across your IM and Presence clusters.
- C. AXL service should be activated only on the publisher of each IM and Presence cluster.
- D. Your IM and Presence Service clusters must have Multiple Device Messaging disabled.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cloudCollaboration/spark/hybridservices/messageservice
NEW QUESTION 52
A MRA deployment is being configured where one of the requirements is for registered Jabber users to pull directory photos from an internal server. What should be configured on the Expressway-C so that MRA registered clients reach this server?
- A. The directory photo server FQDN must be added to the Expressway-C certificate.
- B. A search rule must be created to route the requests to Cisco UCM.
- C. A neighbor zone must be created to the directory photo server.
- D. The directory photo server must be added to the HTTP allow list.
Answer: D
NEW QUESTION 53
Which step is required when configuring Cisco Webex Hybrid Message Service?
- A. Add Cisco Unity Connection to Expressway-E.
- B. Add Expressway-C and Cisco United CM to the Cisco Webex Cloud.
- C. Register Expressway-C Connector Hosts to the Cisco Webex Cloud.
- D. Register Expressway-C to Cisco Unified Communications Manager.
Answer: C
NEW QUESTION 54
An organization with a domain name of example.com.
Which two SRV records are valid for a SIP and H.323 communication? (Choose two.)
- A. _collab-edge._tls.example.com
- B. _sips._tcp.example.com
- C. _sips._udp.example.com
- D. _h323ls._udp.example com
- E. _h323ls._tcp.example.com
Answer: B,D
Explanation:
Explanation
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-
NEW QUESTION 55
An organization wants to enable a Cisco Webex connector to synchronize all employees automatically with Cisco Webex instead of using a manual list.
Where is the Webex Hybrid Directory Service configured?
- A. Enable the directory service on Cisco Expressway Edge for Office 365 or Cisco Expressway Core for internal Active Directory and add the service in Webex Control Hub.
- B. Install the Cisco Express Connector and configure the device in Cisco Unified Communications Manager under Cisco Unified Serviceability and add the service in Webex Control Hub.
- C. Install Cisco Directory Connector on a Microsoft Windows Domain server and configure the software and Webex Control Hub.
- D. Enable the directory service in Cisco Unified Communications Manager under Cisco Unified Serviceability and add the service in Webex Control Hub.
Answer: C
NEW QUESTION 56
Refer to the exhibit.
In an environment SIP devices are registered to CUCM and H.323 devices to VCS. What would be required to enable these calls to setup correctly?
- A. Change the interworking mode to On.
- B. Disable SIP in the external zone.
- C. Change the domain of SIP endpoint A to cisco.com.
- D. Create a presearch transform.
Answer: A
NEW QUESTION 57
What is the Cisco-recommended key length in bits for a Cisco Expressway certificate?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 58 
Refer to the exhibit. Cisco Unified Communications Manager routes the call via the Webex Meetings route list and route group to the Video Mesh cluster Node#1 in the Video Mesh cluster is hosting the meeting and has reached full capacity, but other nodes in the cluster still have spare capacity.
What happens to the participant's call?
- A. The call is queued.
- B. Another node in the cluster is used and an intra-cluster cascade between the two Video Mesh nodes is formed.
- C. The call fails.
- D. Another node in the cluster is used and an intra-cluster cascade between Webex and the new Video Mesh node is formed.
Answer: D
NEW QUESTION 59
Refer to the exhibit.
In an environment SIP devices are registered to CUCM and H.323 devices to VCS. What would be required to enable these calls to setup correctly?
- A. Change the interworking mode to On.
- B. Disable SIP in the external zone.
- C. Change the domain of SIP endpoint A to cisco.com.
- D. Create a presearch transform.
Answer: A
NEW QUESTION 60
Which two licenses are required for the B2B feature to work? (Choose two.)
- A. Advanced Networking
- B. TURN Relays
- C. Device Provisioning
- D. Traversal Server
- E. Rich Media Sessions
Answer: C,E
NEW QUESTION 61
Which attribute in the SDP for a call is affected by the static NAT address configuration in an Expressway-E?
- A. version
- B. connection
- C. bandwidth
- D. name
Answer: D
NEW QUESTION 62
Jabber cannot log in via Mobile and Remote Access. You inspect Expressway-C logs and see this error message:
XCP_JABBERD Detail="Unable to connect to host '%IP%', port 7400:(111) Connection refused" Which is the cause of this issue?
- A. Expressway-E is listening on the wrong IP interface.
- B. The destination port for Expressway-E is set to 7400 instead of 8443 on the Expressway-C.
- C. Rich Media Session licenses are not activated on Expressway-E.
- D. The XCP Service is not activated on Expressway-E.
Answer: A
NEW QUESTION 63
The Cisco Webex Hybrid Message service is deployed geographically for separate Cisco Unified IM and Presence clusters. What must be configured in the Cisco Webex Control Hub to achieve this deployment?
- A. verified domains
- B. distributed DNS
- C. geo-locations
- D. resource groups
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cloudCollaboration/spark/hybridservices/ messageservice/cmgt_b_spark-hybrid-message-deployment-guide/cmgt_b_spark-hybrid-messagedeployment-guide_chapter_00.html
NEW QUESTION 64
Which entry in the public (external) DNS is valid to configure DNS SRV records for a Cisco Mobile and Remote Access solution?
- A. _cisco-expwy._tls.<domain>
- B. _cisco-mra._tls.<domain>
- C. _cisco-uds._tcp.<domain>
- D. _collab-edge._tls.<domain>
Answer: C
NEW QUESTION 65
Refer to the exhibit.
While troubleshooting Cisco Jabber login issues, there are some error messages. Why is the Jabber client unable to sign in?
- A. service discovery issues
- B. XMPP bind failures
- C. down Cisco Unified Communications Manager server
- D. incorrect login credentials
Answer: B
NEW QUESTION 66
A call is sent by Cisco UCM to Expressway with a URI of [email protected]. If (7508...)
@expc1a\.pod8\.test\.lab.* is the pattern string, what would be the replacement string of the transform in Expressway to re-write the call so that it becomes [email protected]?
- A. \1@conf\.pod8\.test.lab.!
- B. \1@conf\.pod8\.test\lab.*
- C. \1@conf\.pod8.test.lab.@
- D. \[email protected]\.test\.lab
Answer: D
NEW QUESTION 67
Refer to the exhibit.
A new neighbor zone is added for a new Cisco Meeting Server, but the zone is showing a SIP status of failed from the time the zone it was created. What should be done to resolve this issue?
- A. The underlying DNS issue must be resolved
- B. More bandwidth must be added to the appropriate pipes
- C. The existing zone using ID 7 must be deleted
- D. The search rule must be changed to continue on match
Answer: D
NEW QUESTION 68
Refer to the exhibit.
If the Webex Teams device cannot connect to Video Mesh Cluster-1 because it is busy, which media node does the Webex Teams device connect to next?
- A. Both Cloud Node US-EAST and US-WEST
- B. Video Mesh Cluster-2
- C. Cloud Node US-EAST
- D. Cloud Node US-WEST
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cloudCollaboration/wbxt/videomesh/cmgt_b_webex-vid
NEW QUESTION 69
Which two statements about Expressway media traversal are true? (Choose two.)
- A. Expressway Control is the traversal server installed in the DMZ.
- B. Cisco Unified Communications Manager zone can be either traversal server or client.
- C. Both Expressway Edge interfaces can be NATed.
- D. The Unified Communications traversal zone can be used for Mobile and Remote Access.
- E. The Expressway Edge must be put in a firewall DMZ segment.
Answer: D,E
NEW QUESTION 70
......
Here is Cisco 300-820 Exam
This exam assesses your experience of cooperating in cloud and edge solutions, consisting of: Cisco Unified Instant Messaging and Presence, Road configurations,Cisco Webex teams intersect as do emerging technologies.Comprehension and also the skills you need to have for this exam: Understanding of modern network technologies ,Understanding of voice and video clips ,Proficiency in Cisco Core Partnership Technologies , Login Method (SIP) and also Extensible Messaging and Existence Procedure (XMPP) Signaling Method Basics, Call Control Basics Working with Cisco Unified Communications Supervisor.
Study resources for the Valid 300-820 Braindumps: https://www.pass4surecert.com/Cisco/300-820-practice-exam-dumps.html
Latest CCNP Collaboration 300-820 Actual Free Exam Questions: https://drive.google.com/open?id=1RN-_LSc66DPrmsOHrKQtur8-Hm2QrHmH