Get instant access to C_IBP_2311 Practice Tests 2024 Free Updated Today!
Welcome to download the newest PassLeader C_IBP_2311 PDF dumps ( 80 Q&As)
SAP C_IBP_2311 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 40
Which of these conditions must be met to create a Local Member key figure? Note: There are 2 correct answers to this question
- A. Users should have authorization for template administration.
- B. Activate Local Member recognition settings is selected
- C. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel
- D. Use Excel Cell reference in the report editor option is selected
Answer: A,B
NEW QUESTION # 41
What is a prerequisite for modelling outsourced manufacturers with production capacity using the Supply Optimizer?
- A. Ensure that the outsourced manufacturing locations have a separate subnetwork
- B. Model relative production costs across internal locations and outsourced manufacturing locations
- C. Use production lead times and offsets to manage components at the outsourced manufacturing location
- D. Model target inventory and stocks at the outsourced manufacturing location
Answer: B
NEW QUESTION # 42
What function would you use to configure a year-to-date calculation?
- A. Last Period Aggregation
- B. Dynamic Rolling Aggregation
- C. Cumulative Aggregation
- D. Rolling Aggregation
Answer: C
NEW QUESTION # 43
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand. Which solutions would apply to this scenario? Note: There are 2 correct answers to this question.
- A. Minimum capacity utilization will result in pull production
- B. Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs
- C. Excess stock can be generated and will need to be staged in an overflow warehouse
- D. Capacity leveling will be possible for production and storage resources.
Answer: B,C
NEW QUESTION # 44
You are starting a new implementation project for SAP IBP and are considering the possible system architecture. What are the possible approaches for setting up the system landscape? Note: There are 2correct answers to this question
- A. Set up a three-tier landscape using transport, starting from the development system to test and - production
- B. Create additional planning areas in the test system to support training needs.
- C. Create additional test planning areas in the production system to support cutover needs
- D. Setup the two-tier landscape and have the configuration for development system regularly - updated from the production system
Answer: A,B
NEW QUESTION # 45
Which unified planning processes' data is commonly reviewed in SAP IBP for sales and operations? Mote: There are 2 correct answers to this question.
- A. Constrained Demand plan
- B. Inventory Plan
- C. Consensus Demand Plan
- D. Global Demand Plan
Answer: B,C
NEW QUESTION # 46
What are possible approaches to modeling a customer demand in time-series-based optimization with SAP IBP for response and supply? Note: There are 2 correct answers to this question.
- A. Ensure discounting does not result in negative costs for each customer-product combination.
- B. Try to go as granular as possible with the customer product
- C. Ensure product prioritization with the combination of customer and product
- D. Assign a high cost value (1 million or more ) for non-delivery to priority customers
Answer: A,C
NEW QUESTION # 47
You are developing the functionality and appearance of the Excel UI for SAP IBP business users. Which extensibility capabilities for SAP IBP, add-in for Microsoft Excel are provided by Custom VBA coding? Note:There are 2 correct answers to this question.
- A. Changing the layout of the master data workbooks
- B. SAP IBP ribbon extension
- C. Chaging the entries from the Name Manager
- D. Changing the member names
Answer: A,B
NEW QUESTION # 48
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)? Note: There are 3 correct answers to this question
- A. Maximum lot size
- B. Aggregated constraints
- C. Adjusted transportation receipts
- D. Transportation lead time
- E. Minimum lot size
Answer: C,D,E
NEW QUESTION # 49
What is an example of a commonly used time-independent key figure?
- A. Any attribute as a key figure
- B. A currency conversion key figure, such as Exchange Rate
- C. A unit of measure key figure, such as UoM Conversion Factor
- D. A Special key figure marked as an aggregate key figure (aggregate constraint)
Answer: A
NEW QUESTION # 50
Which Supply Planning processes are part of the tactical Planning level within a Planning Hierarchy? Note:
There are 2 correct answers to this question.
- A. Balancing Supply and Demand
- B. Order Prioritization
- C. Stock Replenishment
- D. Inventory Build and Reduction
Answer: A,D
NEW QUESTION # 51
What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct answers to this question
- A. Identify inventory items that quire closer attentions
- B. Choose time-independent key figures as segmentation measures
- C. Substitute missing values in case of sporadic demands.
- D. Use forecasting algorithms that are specific to seasonal demands of SKUs in the segment "B"
Answer: A,B
NEW QUESTION # 52
You want to display and edit data in different Units of Measure (UOM). Which of the following must you consider before you use the UOM? Note: There are 3 correct answers to this question.
- A. Units of measure are usually not time-independent.
- B. Units of measure are usually not time-dependent
- C. Analytics allow the user to select the target unit of measure
- D. Units of measure is an attributes of master data type, such as product
- E. Conversion to the target unit of measure is handled by the SAP IBP Excel add-in.
Answer: B,C,D
NEW QUESTION # 53
What are some of the available ABC segmentation methods in SAP IBP? Note: There are 2 correct answers to this question.
- A. By Number of Items (Sorted Value)
- B. By Pareto Principle (Sorted and Cumulated %)
- C. By Pareto Principle (Sorted and Calculated Values
- D. By Number of Items (Sorted Average)
Answer: A,B
NEW QUESTION # 54
Which of the following checks for master data and key figures does the Check Mode algorithm trigger? Note: There are 3 correct answers to this question.
- A. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network
- B. It checks whether the sourcing in the Production Source Item master data type exists.
- C. It reports input key figure for which no related master data exists.
- D. It checks whether the location resource specified in the master data forms a cycle in the supply chain network
- E. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network
Answer: A,B,E
NEW QUESTION # 55
Which Master Data Types are used in time-series-based planning within SAP IBP for response and supply? Note: There are 3 correct answers to this question
- A. Transportation lane
- B. Customer
- C. DS Order fulfilment
- D. Location
- E. Product
Answer: B,D,E
NEW QUESTION # 56
How do you achieve rolling aggregation with SAP IBP?
- A. Using an attribute as a key figure
- B. Using an appropriate period weight factor
- C. Using a local member
- D. Using a key figure calculation
Answer: D
NEW QUESTION # 57
Analytics charts are created by the user in the Advanced Analytics application. What can the user do in the Advanced Analytics app? Note: There are 2 correct answers to this question.
- A. Merge charts together.
- B. Group Data
- C. Applying filters on there data
- D. Trigger export to Manage Analytics stories
Answer: B,C
NEW QUESTION # 58
You are setting up planning with lot sizes. What are some of the properties of lot sizes that you need to beware of? Note: There are 2 correct answers to this question
- A. Lot size are time-independent master data settings
- B. Lot sizes are applicable for production and handling quantities.
- C. Lot size are applicable for production and transportation quantities
- D. Periodic lot size setting overrides the minimum lot size.
Answer: A,C
NEW QUESTION # 59
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct answers to this question.
- A. Display all assigned analytics on a single UI
- B. Add Process instances
- C. Use drill-down functionality
- D. Link two analytics charts.
- E. Rename the charts
Answer: A,B,C
NEW QUESTION # 60
What are the S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery
- B. Number of fair share segments Additional tiering costs (default) Inventory days of supply
- C. Number of fair share segments Additional tiering costs (default) Maximum inventory
- D. Number of fair share segments Maximum days of coverage Number of fair share segments late delivery
Answer: A
NEW QUESTION # 61
What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct answers to this question.
- A. Specify a planning horizon in the planning area for each level of the assigned time profile
- B. Configure at most two input key figures on the same planning level in a key figure calculation
- C. Configure at least one calculated key figure for the planning area
- D. Assign the compound master data type and its component master data types
Answer: A,D
NEW QUESTION # 62
......
Aug-2024 Latest Pass4sureCert C_IBP_2311 Exam Dumps with PDF and Exam Engine: https://www.pass4surecert.com/SAP/C_IBP_2311-practice-exam-dumps.html
Premium Quality SAP C_IBP_2311 Online dumps: https://drive.google.com/open?id=1S6Q01ydEJnsZtibiFjPTWpSea69hxu94