[Nov 07, 2021] Ultimate NS0-194 Guide to Prepare Free Latest Network Appliance Practice Tests Dumps
Get Top-Rated Network Appliance NS0-194 Exam Dumps Now
Network Appliance NS0-194 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 47
While troubleshooting client access issues to a CIFS share, you notice that the issue only occurs when the data LIF that the clients are accessing is on a specific node in the cluster.
In this scenario, which configuration should you review to determine why this issue is happening?
- A. Kerberos
- B. export policies
- C. share path
- D. cluster health
Answer: A
NEW QUESTION 48
Your customer calls at 8:40 a.m. indicating that the performance of his FAS2240- 2 is very slow for all protocols used (NFS, FC, and SMB).
The customer explains that the day before, he migrated half of his virtual machines (VMs) onto new VMware VMFS data store LUNs in the same volume as his old VMFS data store LUNs.
What are two reasons for the customer's problem? (Choose two.)
- A. After moving the VMs, they are now backed up as new data in that volume, causing the SnapVault relationships to still operate. This is overloading the disks and causing slow performance for all users.
- B. Moving the VMs elsewhere did not release the volume capacity used because of Snapshot copies. Now the volumes are too full and this will impact performance for all users.
- C. Moving the VMs to different data stores put their low read load VMs on slow disks. Because the read I/O for those VMs is slow, this is impacting consistency points on the controllers.
- D. After moving the VMs to different data stores, the deduplication jobs that started during the night are still running. This is causing high disk utilization, impacting overall performance.
Answer: A,B
NEW QUESTION 49
A customer recently had a controller module failure on a FAS62xx system running clustered Data ONTAP 8.3.1.
The controller module had been replaced last night and everything is working well but the customer noticed warnings concerning licensing on the console. The warnings say there is a grace period of 89 days remaining.
In this scenario, what should be done to solve this problem?
- A. Execute a system restore to recover the previous license keys, and then apply to the new controller module.
- B. Obtain new 8.2x format license keys and install them using the appropriate commands.
- C. Collect the new license keys from the new controller module packaging and install them using the appropriate commands.
- D. Apply the previously used license keys using the appropriate commands.
Answer: B
NEW QUESTION 50 
Which type of MetroCluster is shown in the exhibit?
- A. 2-node stretch MetroCluster
- B. 4-node MetroCluster IP
- C. 4-node stretch MetroCluster
- D. 4-node Fabric-Attached MetroCluster
Answer: D
NEW QUESTION 51
Which LIF role is used for SnapMirror traffic between two clusters?
- A. ~intercluster~
- B. ~cluster-mgmt~
- C. ~data~
- D. ~cluster~
Answer: A
NEW QUESTION 52
You want to set up a FabricPool between an ONTAP cluster and Google Cloud Storage.
In this scenario, which two components are required to accomplish this task? (Choose two.)
- A. intercluster LIFs
- B. an Express Route
- C. a service account access key
- D. a Certificate Authority (CA) certificate
Answer: A,D
Explanation:
Explanation/Reference: https://www.netapp.com/pdf.html?item=/media/17239-tr4598pdf.pdf
NEW QUESTION 53
The details from within Active IQ Cluster Viewer are downloadable in which three file formats? (Choose three.)
- A. CSV
- B. PDF
- C. DOC
- D. HTML
- E. XLS
Answer: A,B,E
NEW QUESTION 54
In ONTAP 9.5, the event log show command queries and displays entries from which file?
- A. mgwd.log
- B. ems.log
- C. bcomd.log
- D. messages.log
Answer: B
NEW QUESTION 55
A customer fails to see any disks in SnapDrive for Windows but they do see them in File Explorer. Which two statements describe what you should do to solve this problem? (Choose two.)
- A. Restart the SnapDrive for Windows service.
- B. Verify that the transport protocol is set to HTTPS.
- C. Unmap and map all the LUNs back to the Windowsmachine.
- D. Perform a rescan from the Disk Management MMC.
Answer: A,D
NEW QUESTION 56
Click the Exhibit button. Your customer explains that his disks are showing 100% utilization, but he does not see very much user I/O. While investigating, you collect statistics using the statit command over a 10-second time period as shown in the exhibit.
In this scenario, what is the problem?
- A. The end users are doing a lot of reads on the SATA disks using VAAI, which does not show up as user I/O.
- B. Disk 0a.16 is faulty, indicated by the high latency for ureads, and should be replaced.
- C. Disk 0a.16 is being used to reconstruct data from a failed disk in the aggregate.
- D. The network has too many multicast packets, which means the data is not being sent out over the network correctly.
Answer: A
NEW QUESTION 57
You have a 4-node MetroCluster configuration. The systems are operating normally with no faults.
In this scenario, which statement describes the usage of NVRAM when a host sends a write to a node?
- A. Incoming writes are written to the receiving node's NVRAM and its DR partner's NVRAM only.
- B. Incoming writes are written to the all four nodes' NVRAM.
- C. Incoming writes are written to the receiving node's NVRAM and its HA partner's NVRAM only.
- D. Incoming writes are written to the receiving node's NVRAM, its HA partner's NVRAM, and its DR partner's NVRAMonly.
Answer: A
NEW QUESTION 58 
In the AFF A200 shown in the exhibit, which port is a CNA port?
- A. |0|0|
- B. 0a
- C. e0a
- D. e0c/0c
Answer: D
Explanation:
Explanation/Reference: https://docs.netapp.com/platstor/topic/com.netapp.doc.hw-2700-install-setup/GUID-FE4BD3C8-
3DB4-438A-A5CE-FEEF74AE8BAF.html
NEW QUESTION 59
A customer has a company -wide power outage scheduled and needs to gracefully power off a 2-node cluster. In this scenario, which two steps should be performed? (Choose two.)
- A. Use the halt -node -skip-lif-migration-before-shutdown true -inhibit-takeover true command.
- B. Invoke and AutoSupport message to indicate aplanned maintenance time.
- C. Use the half -node * command
- D. Use OnCommand system Manager to half the controllers.
Answer: A,B
NEW QUESTION 60
A customer receives the message shown below in their EMS logs.
Tue Jun 27 18:34:18 CEST
[netapp-ct1: cp_worker: wafl.cp.toolong:error]: Aggregate AG1_NTAP_PROD experienced a long CP.
Tue Jun 27 18:37:10 CEST
Which two data sources do you use to explain this message? (Choose two.)
- A. mgwd.log
- B. Active IQ Unified Manager
- C. Performance Archive
- D. ONTAP System Manager
Answer: C,D
Explanation:
Explanation/Reference: https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/ First_steps_troubleshooting_wafl_exempt10%3A_wafl.cp.toolong%3Aerror
NEW QUESTION 61
Your customer has a 2-node cluster with two FAS2554 controllers running clustered Data ONTAP 8.3. You want to upgrade non-disruptively to clustered Data ONTAP 8.3.1 using the rolling-upgrade method.
Which two operations would you perform before issuing the A storage failover takeover - of node NodeA- command? (Choose two.)
- A. Install the new software image on all nodes.
- B. Migrate all LIFs used for iSCSI and FC away from NodeA.
- C. Change the default boot image to the new image.
- D. Upgrade the service processor of all nodes.
Answer: D
NEW QUESTION 62
A customer has a cluster running ONTAP where AutoSupport notifications have worked in the past but have recently stopped working. In this scenario, what are two steps to begin troubleshooting the problem? (Choose two.)
- A. Review AutoSupport settings on the controller pair.
- B. Review the SMTP server status.
- C. Use support entitlement on the NetApp Support site.
- D. Review the AutoSupport history on the controller pair.
Answer: A,D
NEW QUESTION 63
A customer discovers fault lights on both HA interconnect links in a 2-node cluster. The customer is concerned about the cluster's ability to serve data.
Which statement is true in this scenario?
- A. You should reboot both nodes.
- B. The HA interconnect links would automatically recover from this temporary state.
- C. ONTAP clustering does not depend on HA interconnect links and will continue to serve data.
- D. You should perform a takeover and serve the data in failover state.
Answer: C
NEW QUESTION 64
Users are complaining about slow file access. You suspect that the ONTAP cluster is causing the problem.
In this scenario, which ONTAP command would help you troubleshoot this problem?
- A. qos statistics volume latency show
- B. clusterlog-forwarding show
- C. application show-statistics
- D. storage aggregate verify
Answer: D
NEW QUESTION 65
A customer observes write latencies above 40 ms on a clustered Data ONTAP system with two FAS3220s for a period of several minutes each night.
During performance analysis, you discover that several back-to-back CPs occur In this scenario, which two configuration changes will reduce the write latencies? (Choose two.)
- A. Add flash cache cards to the nodes.
- B. Migrate the LIF with the highest network receive rate to a faster port.
- C. Add more disks to the aggregate.
- D. Move the volume with the highest write load to an aggregate with faster disks.
Answer: A,D
NEW QUESTION 66
You receive an AutoSupport notification because of the error shown below. "HA GROUP ERROR: DISK/SHELF COUNT MISMATCH ERROR."
In this scenario, which two steps would you take to solve the problem? (Choose two.)
- A. You should perform a failover and a giveback to clear the error.
- B. You should review the /etc/messages log.
- C. You should examine the IOM modules for error lights and reseat.
- D. You should power cycle all the disk shelves to clear the error.
Answer: B,D
NEW QUESTION 67
Source Path Destination Path Relationship ID Relationship Type
msgld: msragld: 78e304e0-9781-1234-abcd-00a098d771bd XDP
msxpgld: msraxpgld: 3ca42ab4-9782-1234-abcd-00a098d771bd XDP
na_docavgld: ndradocavgld: a4b233b2-9783-1234-abcd-00a098d771bd XDP
na_dr: ndradr: c97d36a0-6d7c-11e8-83fb-00a098d771bd XDP
na_gld: ndragld: 9e7e034d-9782-1234-abcd-00a098d771bd XDP
na_mpgld: ndrampgld: 16e52e0d-9783-1234-abcd-00a098d771bd XDP
na_opengld: ndraopengld: dabb1813-9780-1234-abcd-00a098d771bd XDP
na_poc: ndrapoc: c1d632d7-977b-1234-abcd-00a098d771bd XDP
na_pubgld: ndrapubgld: 1a3f866c-9780-1234-abcd-00a098d771bd XDP
Referring to the output, which type of SnapMirror destination relationship is being used?
- A. SnapVault
- B. Storage Virtual Machine DR
- C. Single Volume SnapMirror Synchronous
- D. Single Volume SnapMirror Asynchronous
Answer: D
NEW QUESTION 68
You need to provide a customer an action plan to update an ONTAP system after a security bulletin has been issued.
In this scenario, how do you accomplish this task?
- A. Review the ONTAP 9 product page.
- B. Download the target version and do a pre-check.
- C. Use Upgrade Advisor on Active IQ.
- D. Use the Interoperability Matrix Tool.
Answer: B
NEW QUESTION 69
A hosting company is about to deploy a Microsoft Hyper-V environment connected to NetApp storage. They want to know which version of SMB and Data ONTAP should be deployed in this environment that supports continuously available shares.
In this scenario, what do you tell the customer?
- A. clustered Data ONTAP and SMB 2.1
- B. Data ONTAP /Mode and SMB3
- C. clustered Data ONTAP and SMB 3
- D. Data ONTAP 7 Mode and SMB 2.1
Answer: C
NEW QUESTION 70
You want to monitor and generate reports on a customer's IT infrastructure, including virtual and cloud-based components, even though the customer has not purchased or installed any ONTAP software.
In this scenario, which NetApp tool would be used to accomplish this task?
- A. OnCommand Workflow Automation
- B. OnCommand Insight
- C. OnCommand Unified Manager
- D. OnCommand System Manager
Answer: B
NEW QUESTION 71
......
NetApp NS0-194 Exam Certification Details:
| Exam Code | NS0-194 NCSE |
| Passing Score | 63% |
| Exam Price | $150 USD |
| Duration | 90 minutes |
| Exam Registration | PEARSON VUE |
| Recommended Training | Introduction to NetApp Storage System Basic Components (WBT) Introduction to Clustered Data ONTAP Architecture (WBT) Introduction to Aggregates and FlexVols in Clustered Data ONTAP (WBT) Introduction to Networking in Clustered Data ONTAP (WBT) Introduction to High-Availability in Clustered Data ONTAP (WBT) Introduction to Data Protection in Clustered Data ONTAP (WBT) |
| Number of Questions | 60 |
| Sample Questions | NetApp NS0-194 Sample Questions |
| Exam Name | Support Engineer |
Passing Key To Getting NS0-194 Certified Exam Engine PDF: https://www.pass4surecert.com/NetworkAppliance/NS0-194-practice-exam-dumps.html
NS0-194 Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=1rSvw6aE5fKXYb3LF7r9BkTfT4i6VA6TQ