[May 13, 2022] Download Free Huawei H35-211_V2.5 Real Exam Questions
Pass Your Exam With 100% Verified H35-211_V2.5 Exam Questions
NEW QUESTION 32
(Multiple select) When there is a backbone fiber break or OLT does not detect the expected optical signal
(L0S) alarm, the possible cause is that
- A. The port backbone fiber is faulty
- B. Any power loss or failure under the port
- C. The port laser is turned off
- D. Rogue ONU exists under the port
Answer: A,B,C
NEW QUESTION 33
(Radio) The downstream effective bandwidth of the GPON PON port is
- A. 2.5G
- B. 2G
- C. 1.25G
- D. 2.2G
Answer: A
NEW QUESTION 34
(Single choice) The following statement about the PITP protocol is incorrect
- A. The purpose of the PITP feature is to provide the upper authentication server with the physical location
information of the access user, and the BRAS device can realize the user account and the press position
after obtaining the user access location information - B. The PITP protocol includes pitp P mode and PITP V mode
- C. PITP P mode can also be called PPOE+ mode
- D. Bind the authentication of the information to avoid the theft and roaming of the user account
- E. In pitp V mode, the user's physical location information is added to the PPPOE message sent by the user
side to cooperate with the upper-level server for user authentication
Answer: E
NEW QUESTION 35
(Radio) When the invitation message sent by user A reaches user B after passing through server C, D, E, the
message received by user B is VIA. The server address of the field information record is in descending order.
- A. E->C->D
- B. C->D->E
- C. E->D->C
- D. C-E->D
Answer: C
NEW QUESTION 36
In esight's OnT zero configuration deployment, do not provision OLT when incrementally configuring OLT.
- A. True
- B. False
Answer: A
NEW QUESTION 37
(Radio) In the ACL, if you need to filter the packet according to the source IP address information, destination
IP address information, port number and other information of the packet, then the acl number template created
is
- A. 0
- B. 3000~3999
- C. 4000~4999
- D. 5000~5999
Answer: B
NEW QUESTION 38
(Single choice) When planning qos, it is necessary to plan reasonably according to the business, and adopt the
() scheduling mode for high-priority businesses.
- A. RR
- B. DRR
- C. WHY
- D. WRR
Answer: C
NEW QUESTION 39
In Huawei's u2000 management system, when adding network elements, you can only add -- ones- when you
access the network element.
- A. Right
- B. wrong
Answer: B
NEW QUESTION 40
The (radio) 10G GPON system uses XGEN frames to encapsulate data, and the PORT ID is defined in the
XGEN header as () bits.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 41
The maximum spectroscopic ratio supported by 10G GPON is (Radio) ?
- A. 0
- B. 1:256
- C. 1
- D. 1:64
Answer: A
NEW QUESTION 42
The (radio) device periodically sends and receives LMCP packets to avoid information loss, and if packets are
not received during ( ) LACp packet interaction cycles, the system considers the port to be down
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 43
(Single-choice) An IPTV user reflects that the TV cannot be watched, open the debug switch on the OLT side,
and the debug printing information is as follows: huawei( config).
This can be judged by the results of the query
- A. User bandwidth validation failed
- B. The poN port multicast bandwidth is insufficient
- C. The user does not have permission to watch the show
- D. IGMP Sakamoto Fussel
Answer: A
NEW QUESTION 44
Multicast technology effectively solves the problem of single-point transmission and multipoint reception, and
realizes efficient data transmission from midpoint to multipoint in IP network.
- A. wrong
- B. Right
Answer: B
NEW QUESTION 45
(Radio) The following is not the QOS service model, is
- A. Best Effort
- B. Intserv
- C. Diffserv
- D. FIFO service
Answer: C
NEW QUESTION 46
(Single)When you configure the HUAWEI NETWORK MANAGEMENT U2000 for FTTH IPTV service
access, which of the following templates needs to be configured ().
- A. SNMP template
- B. Value-added business templates
- C. MGC template
- D. IGMP template
Answer: D
NEW QUESTION 47
Under IGMP snooping, there are two users on demand under the OLT- the same program, and the olt sends
two join messages to the multicast router
- A. Right
- B. wrong
Answer: B
NEW QUESTION 48
The complete SIP message interaction process will contain multiple request and response messages, and the
sIP message header field can be used to describe what the specific solution corresponding to the current
response message is
- A. First line
- B. Csea
- C. Message body
- D. CaLL-ID
Answer: B
NEW QUESTION 49
(Radio) When the 0LT global or VLAN service template enables the PITP switch, the service port allows the
upstream packet to be carried, the Vendor tag switch, and the user to carry the vendor upstream packet In the
case of tarf information, the following statement regarding olts to PITP message processing strategies is
correct
- A. OLT drops upstream PITP packets
- B. OLT forwards the USER-side PITP message directly without any processing
- C. OlT is left with the Vendor tag carried in the upstream PITP message, plus the local Vendor tag
- D. OLT adds a local Vendor tap to the upstream PITP packet
Answer: C
NEW QUESTION 50
The DBA scheduling of the GPON system is only for the upstream traffic, and the downstream traffic cannot
be scheduled.
- A. True
- B. False
Answer: A
NEW QUESTION 51
In the evolution of EPON to 10 G EPON, a smooth transition is achieved at the local level by adding WDM
WDM modules, and ODNs coexist
- A. False
- B. True
Answer: A
NEW QUESTION 52
The establishment, maintenance and dismantling of the word path between the SIP user and the server are
done through the interaction of the --series of messages, so that every information contained in the SIP text has
a --nature, There is no phenomenon in which a single information value appears multiple times.
- A. Right
- B. wrong
Answer: B
NEW QUESTION 53
Under the H.248 protocol, if the signaling IP and media IP are both 10. 1 1 100/8, voice gateway is 10. 1 1 1.
When configuring voIP service, the following command is incorrect
- A. Use the reset coldstart command under Voice Interface to make the interface property configuration take
effect - B. Using the command ip address signaling10 in voip mode. 1 1 10010 1 1 1 Configure the signaling IP
- C. Using the command ip address media10 in voip mode. 1 1 10010 1 1 1 Configure the media IP
- D. Use the if-h248 attributei command to configure interface properties under the voice interface
Answer: B
NEW QUESTION 54
On the U2000 network management, the oLT PON port LED is not green, indicating that the PON port is
faulty.
- A. Right
- B. wrong
Answer: B
NEW QUESTION 55
......
H35-211_V2.5 Dumps 100 Pass Guarantee With Latest Demo: https://www.pass4surecert.com/Huawei/H35-211_V2.5-practice-exam-dumps.html
H35-211_V2.5 Dumps PDF - H35-211_V2.5 Real Exam Questions Answers: https://drive.google.com/open?id=1S037YV3TgBGrPNermIRoSi9s-rchMU6U