100% Updated IBM C1000-018 Enterprise PDF Dumps
Use Valid Exam C1000-018 by Pass4sureCert Books For Free Website
IBM C1000-018 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
NEW QUESTION 32
How can an analyst search for all events that include the keyword 'vims'?
- A. By going to the Log Activity tab and run this AQL: select * from events where eventname like "virus'
- B. By going to the Offenses tab and run a quick search with the 'virus' keyword.
- C. By going to the Network Activity tab and run a quick search with the 'virus' keyword.
- D. By going to the Log Activity tab and run a quick search with the 'virus' keyword.
Answer: A
NEW QUESTION 33
When ordering these tests in an event rule, which of them is the best test to place at the top of the list for rule performance?
- A. When an event matches all of the following [Rules or Building Blocks]
- B. When the source is [local or remote]
- C. When the event(s) were detected by one or more of [these log sources]
- D. When the destination is [local or remote]
Answer: B
NEW QUESTION 34
How can an analyst verify if any host in the deployment is vulnerable to CVE ID; CVE-2010-000?
- A. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: $CVE-2010000
- B. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: CVE-2010000
- C. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: 2010-000
- D. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: $2010-000
Answer: C
Explanation:
Explanation
You receive a notification that CVE ID: CVE-2010-000 is being actively used in the field. To verify whether any hosts in your deployment are vulnerable to this exploit, you can select Vulnerability External Reference from the list of search parameters, select CVE, and then type the 2010-000 To view a list of all hosts that are vulnerable to that specific CVE ID
https://www.ibm.com/docs/en/SS42VS_7.3.2/com.ibm.qradar.doc/b_qradar_users_guide.pdf
NEW QUESTION 35
Where can an analyst investigate a security incident to determine the root cause of an issue, and then work to resolve it?
- A. Offense tab
- B. Vulnerabilities tab
- C. Network Activity tab
- D. Risk tab
Answer: B
NEW QUESTION 36
An analyst has been asked to search for a firewall device that was assigned to a specific address range in the past week.
What method can the analyst use to perform the search that uses simple words or phrases?
- A. Utilize the Natural Language Query module for searching event data.
- B. Use Quick Filter to perform the search for event data.
- C. Write a search query using the Ariel Query Language and regex.
- D. Export the event data and import it to the spreadsheet for searching.
Answer: D
NEW QUESTION 37
An analyst has created a custom property from the events for searching for critical information. The analyst also needs to reduce the number of event logs and data volume that is searched when looking for the critical information to maintain the efficiency and performance of QRadar.
Which feature should the analyst use?
- A. Index Management
- B. Log Management
- C. Event Management
- D. Database Management
Answer: C
NEW QUESTION 38
How can a log source be defined?
- A. Data source such as a firewall or intrusion protection system (IPS) that creates an event log.
- B. Data source such as a user interacting with a QRadar Console to do daily work.
- C. Data source such as Netflow. J-Flow or sFlow data.
- D. Data source that can be found on the Network Activity tab.
Answer: A
NEW QUESTION 39
How does an analyst view which rule triggered an Offense in the Offense summary page?
- A. Actions -> View Rules
- B. Actions -> Display Rules
- C. Display -> Triggered Rules
- D. Display -> Rules
Answer: D
NEW QUESTION 40
An analyst needs to find events coming from unparsed log sources in the Log Activity tab.
What is the log source type of unparsed events?
- A. SIM Unparsed
- B. SIM Unknown
- C. SIM Generic
- D. SIM Error
Answer: C
Explanation:
Explanation
SIM Generic log source or by using the Event is Unparsed filter.
NEW QUESTION 41
An analyst is searching for a list of events that meet specific search criteria and wants to display only the source IP and destination IP information for the events.
To get the required information, the analyst can open the Log Activity tab and then:
- A. select advanced search.
type the corresponding AQL query,
then click search. - B. select the field names,
select the start and end time from the drop down fields in the filters section, then click search. - C. click add filter,
select the desired parameters, operators, values and field names,
then click search. - D. select search,
then new search,
scroll down and select time range, column definitions, the search parameters then click search.
Answer: B
NEW QUESTION 42
What event information within an offense would provide the analyst with a deep insight as to how it was created?
- A. Event Magnitude
- B. Event QID
- C. Event Payload
- D. Event Category
Answer: A
NEW QUESTION 43
An analyst needs to create a dashboard item that can be shared with other users. What is the main step in this process?
- A. Enable a new custom dashboard and share it with users.
- B. Ask the administrator to modify the shared search criteria and test the dashboard.
- C. Create and share the search criteria that the dashboard Item will use.
- D. Have users index the shared search criteria for reuse.
Answer: A
NEW QUESTION 44
An analyst is investigating access to sensitive data on a Linux system. Data is accessible from the /secret directory and can be viewed using the 'sudo oaf command. The specific file /secret/file_08-txt was known to be accessed in this way. After searching in the Log Activity Tab, the following results are shown.
When interpreting this, the analyst is having trouble locating events which show when the file was accessed.
Why could this be?
- A. The 'LinuxServer @ centos' log source has coalescing configured and the specific event for that file can only be accessed by clicking on the 'Event Count' value.
- B. The 'LinuxServer @ centos' log source has not been configured to send the relevant events to QRadar.
- C. The ;LinuxServer @ centos; log source has coalesscing conigured and the specific event for that file has been discardedd.
- D. The 'LinuxServer @ cantos' log source has boon configured as a Faise Positive and the specific event for that file has been dropped.
Answer: A
NEW QUESTION 45
An analyst for a particular offense needs to investigate to understand the breakdown of the offense details.
How can the analyst do this?
- A. Look at all the event QIDs attached to the offense.
- B. Look at the magnitude information and its breakdown.
- C. View the attack path of the offense.
- D. Look at the list of categories, event low level categories and the events attached.
Answer: D
NEW QUESTION 46
How does an analyst view the base64 encoded string of an event's raw payload that contains unprintable characters?
- A. Right click on the event -> view base64 data
- B. Log Activity -> Under Payload Information, click base64 tab
- C. Admin -> Under Payload Information, click base64 tab
- D. Copy the raw payload and use an external tool to view base64 data
Answer: A
NEW QUESTION 47
An analyst needs to investigate an Offense and navigates to the attached rule(s).
Where in the rule details would the analyst investigate the reason for why the rule was triggered?
- A. Rule actions
- B. List of test conditions
- C. Rules response limiter
- D. Rule responses
Answer: C
NEW QUESTION 48
An analyst wants to view information about repeated offenders and IP addresses that generate many attacks or are subject to many attacks.
What should the analyst choose from the navigation options in the Offense tab?
- A. By Event Category or By Event Source
- B. By Log Source IP or By Event Source
- C. By Event or By Flows
- D. By Source IP or By Destination IP
Answer: D
Explanation:
Explanation
Use the navigation options on the left to view the offenses from different perspectives. For example, select By Source IP or By Destination IP.
NEW QUESTION 49
How can an analyst verify if any host in the deployment is vulnerable to CVE ID; CVE-2010-000?
- A. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: 2010-000
- B. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: CVE-2010000
- C. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: $CVE-2010000
- D. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: $2010-000
Answer: C
NEW QUESTION 50
......
IBM C1000-018 Official Cert Guide PDF: https://www.pass4surecert.com/IBM/C1000-018-practice-exam-dumps.html