0 Error Rate

Although a lot of products are cheap, but the quality is poor, perhaps users have the same concern for our latest GB0-371-ENU exam preparation materials. Here, we solemnly promise to users that our product error rate is zero. Everything that appears in our products has been inspected by experts. In our GB0-371-ENU practice materials, users will not even find a small error, such as spelling errors or grammatical errors. It is believed that no one is willing to buy defective products, so, the GB0-371-ENU study guide has established a strict quality control system. The entire compilation and review process for latest GB0-371-ENU exam preparation materials has its own set of normative systems, and the GB0-371-ENU practice materials have a professional proofreader to check all content. Only through our careful inspection, the study material can be uploaded to our platform. So, please believe us, 0 error rate is our commitment.

Each of us expects to have a well-paid job, with their own hands to fight their own future. But many people are not confident, because they lack the ability to stand out among many competitors. Now, our latest GB0-371-ENU preparation materials can help you. It can let users in the shortest possible time to master the most important test difficulties, improve learning efficiency. Also, by studying hard, passing a qualifying examination and obtaining a H3C certificate is no longer a dream. With these conditions, you will be able to stand out from the interview and get the job you've been waiting for. However, in the real time employment process, users also need to continue to learn to enrich themselves. To learn our GB0-371-ENU practice materials, victory is at hand.

DOWNLOAD DEMO

Amazing pass Rate

As the old saying goes, "Everything starts from reality, seeking truth from facts." This means that when we learn the theory, we end up returning to the actual application. Therefore, the effect of the user using the latest GB0-371-ENU exam torrent is the only standard for proving the effectiveness and usefulness of our products. I believe that users have a certain understanding of the advantages of our GB0-371-ENU study guide, but now I want to show you the best of our GB0-371-ENU training Materials - Amazing pass rate. Based on the statistics, prepare the exams under the guidance of our GB0-371-ENU practice materials, the user's pass rate is up to 98% to 100%, And they only need to practice latest GB0-371-ENU exam torrent to hours.

The choice of both birds

Our latest GB0-371-ENU exam torrent is comprehensive, covering all the learning content you need to pass the qualifying exams. Users with qualifying exams can easily access our web site, get their favorite latest GB0-371-ENU study guide, and before downloading the data, users can also make a free demo for an accurate choice. Users can easily pass the exam by learning our GB0-371-ENU practice materials, and can learn some new knowledge, is the so-called live to learn old.

Believe in yourself, choosing the GB0-371-ENU study guide is the wisest decision. So far, the GB0-371-ENU practice materials have almost covered all the official test of useful materials, before our products on the Internet, all the study materials are subject to rigorous expert review, so you do not have to worry about quality problems of our latest GB0-371-ENU exam torrent, focus on the review pass the qualification exam. I believe that through these careful preparation, you will be able to pass the exam.

H3C GB0-371-ENU Exam Syllabus Topics:

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

Question 1

In the networking shown in the figure, the PIMSM protocol runs between RT1, RT2 and RT3, the RP is 1.1.1.1, and there is a downstream receiver RT3 connected to a multicast source, check the RT3 unicast routing table as follows:
[RT3]display ip routing-table
Routing Tables: Public
Destinations: 10 Routes: 10
Destination/MaskProtoPreCost NextHop Interface
1.1.1.1/320SPF 10 1562 192.168.2.1 so/2/1
127.0.0.0/8 Direct 00127.0.0.1 InLoopO
127.0.0.1/32Direct 00127.0.0.1 InLoopO
192.168.0.0/30Direct 00192.168.0.2 S0/2/0
192.168.0.1/32Direct 00192.168.0.1 S0/2/0
192.168.0.2/32Direct 00127.0.0.1 InLoopO
192.168.1.0/300SPF 10 3124 192.168.2.1 so/2/1
192.168.2.0/30Direct 00192.168.2.2 so/2/1
192.168.2.1/32Direct 00192.168.2.1 so/2/1
192.168.2.2/32Direct 00127.0.0.1 InLoopO
Then, after the RP sends the registration stop message, which of the following routers have (S, G) entries

A. RT2
B. RT1
C. RT3

Question 2

The customer LAN switches SWA, SWB, and SWC form the RRPP ring main ring 1, and the switch SWB has the following configuration information:
[SWB]rrpp domain 1
[SWB-rrpp-domain1]ring 1 node-mode transit primary-port gigabitethernet 2/0/1 secondary-port gigabitethernet 2/0/2 level 0
If the switch SWA is the master node of primary ring 1, if the switch SWB port GigabitEthem2/0/1 fails, you can know from the above information

A. SWA will send Link-Down messages to notify all nodes
B. The switch SWA immediately switches the state to the Failed state and releases the secondary port
C. The switch SWA will send a Common-Flush message to notify all transmission nodes
D. If the switch SWB finds that the port GigabitEthernet 2/0/1 becomes Up again, it will immediately unblock the port

Question 3

The following statements about PIMSM shared network segment DR are correct:

A. Only when there are multiple routers on the receiver side connected to the shared network segment and the routers are running IGMPV1, DR elections are required
B. The DR on the multicast source side must run IGMP, otherwise the receiver on the receiver side cannot receive multicast traffic
C. The DR on the receiver side is responsible for sending a join message to the RP
D. The DR on the multicast source side is responsible for sending register messages to the RP

Question 4

In the switching network as shown in the figure, all three switches have only default VLAN1. The interconnection ports of the three switches are Trunks, and all VLANs are allowed to pass. All three switches have the global and port GVRP functions enabled. VLAN 10 is created on the switch SWA, VLAN 20 is created on the switch SWC, and the GVRP registration mode of the Ethernet1/0/1 port is set to Forbidden on the switch SWA. Check the status of each Trunk port on the three switches. (Choose one or more)

A. [SWC]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10,20 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
B. [SWA]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
C. [SWB]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
D. [SWB]display interface Ethernet 1/0/2 Ethernet1/0/2 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10,20 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q

Question 5

In the switching network as shown in the figure, all three switches only have the default VLAN1, the interconnection ports of the three switches are trunks, and all VLANs are allowed to pass, and the three switches have the global and port GVRP functions enabled. VLAN 10 is created on the switch SWA, VLAN 20 is created on the switch SWC, and the GVRP registration mode of the Ethernet 1/0/1 port is set to Fixed on the switch SWA, and the display vlan command is executed on the SWB to view the VLAN existing on VLASWB ( Select one or more)

A. VLAN1
B. VLAN20
C. VLAN 10

Solutions: